Skip to content
Design and Building

How to Size a Pond or Waterfall Pump

Key takeaways

  • Add the height of the lift to the pipe friction to get total head.
  • A spillway needs about one hundred fifty gallons an hour per inch of width for a good sheet.
  • Choose the pump that gives your flow at your head, not the biggest one.

The pump is the heart of the feature. A few numbers tell you what size to buy.

Flow for the waterfall

A good sheet of water over a spillway needs roughly one hundred to two hundred gallons an hour for each inch of width. A spillway twelve inches wide at one hundred fifty gallons an hour per inch needs about eighteen hundred gallons an hour.

Total head

Total head is the height the water rises plus the friction in the pipe and the fittings. Every pump has a chart that shows how much it delivers at each head. A pump rated for four thousand gallons an hour may deliver half that at ten feet.

Pick the pump

Choose a pump that delivers the flow you need at your total head, and a little more for a clogged filter. The Waterfall Flow Calculator and the Pump and Head Calculator on this site do the math.

Related services and tools

Questions about your own yard or pond? Call or text 800-224-9245, or use the estimate form below.

Visit

Let's bring your water to life.

Tell us about your yard or your pond and the water you picture. We read every message and reply with clear next steps and a time for your visit.

  • Your property: where it is, the space you have and the water feature you picture or the one you own
  • Your city, the job you have in mind, and any result you saved from a tool on this site
  • A visit where we walk the yard, listen and begin a plan around what you want
Prefer to talk? Call or text800-224-9245

Your estimate request

Prefer to type? Text your request. We only use your details to respond to your request.