Waterfall Flow Calculator
Enter the width of the spillway and the look you want to see the gallons an hour the pump must deliver.

Waterfall builders use a rule of thumb of gallons an hour for each inch of spillway width: about 50 for a trickle, 100 for a gentle sheet, 150 for a full sheet and 200 for a roaring fall. The flow in gallons an hour is the width in inches times that figure, and dividing by 60 gives gallons a minute. The pump must deliver that flow at your total head, so the rating to look for adds 20 percent for a dirty filter and for fittings, rounded up to the next 100. The water moved in a day is the flow times the hours the falls run. Real flow also depends on the lip of the stone, so we set the pump on site and tune it.
Three quick steps
- 1Set the spillwayWidth in inches.
- 2Pick the lookTrickle to roaring.
- 3Read the pumpGallons an hour and rating.
About the waterfall flow calculator
How much water does a waterfall need?
A common rule is about 100 gallons an hour for each inch of spillway width for a gentle sheet, more for a full sheet and less for a trickle.
Why add 20 percent to the pump rating?
Filters clog and fittings add friction, so a pump rated a little above the need keeps the sheet full as the system gets dirty.
Does a taller waterfall need more flow?
The flow for a good sheet depends on the width, but a taller fall needs a pump that can lift to that height. The Pump and Head Calculator on this site shows the head.
Services that go with this tool
Custom Waterfall ConstructionA waterfall designed for your slope and your ears, built stone by stone.See the service Fountains
Sheer Descent and Rain CurtainsA smooth sheet of water or a curtain of falling drops for a modern look.See the service Falls
Boulder WaterfallsLarge natural stones stacked into falls that look like they were always there.See the service Ready to hear the water?
Call or text Aquatic Illusion, or send the form, and we will set up a visit. Tell us about your yard and the water feature you picture.

