Skip to content
Free tool

Pump and Head Calculator

Enter the lift, the pipe and the flow to see the total head and the pump rating to look for.

A submersible pond pump with a black housing, a cable and an outlet
The lift
The pipe
The flow
Call 800-224-9245

    Friction in the pipe comes from the Hazen-Williams formula for smooth plastic pipe: head loss per 100 feet is 0.2083 times (100 / 140) to the power 1.852, times the flow in gallons a minute to the power 1.852, divided by the inside diameter to the power 4.8655. The inside diameters used are 1.049, 1.61 and 2.067 inches for 1, 1.5 and 2 inch schedule 40 pipe. Fittings are covered by adding 25 percent to the length of the run. The total head is the lift plus the friction, and the water speed in feet a second is 0.4085 times the flow in gallons a minute divided by the diameter squared. Many designers keep the speed under 8 feet a second, and the pump to buy delivers your flow at your total head on its own chart.

    How to use it

    Three quick steps

    1. 1Enter the liftHeight to the top of the falls.
    2. 2Describe the pipeLength and size.
    3. 3Read the headFriction, total head and speed.
    Questions

    About the pump and head calculator

    What is head?

    Head is the height a pump must lift the water plus the friction in the pipe. A pump delivers less flow at a higher head, which is why its chart matters.

    Why does a small pipe cost so much head?

    Friction rises very fast as water speeds up in a narrow pipe. Going up one pipe size can cut the friction loss by more than half.

    How fast should water move in the pipe?

    Many designers keep it under 8 feet a second to limit noise and friction. The calculator shows the speed for your pipe.

    Ready to hear the water?

    Call or text Aquatic Illusion, or send the form, and we will set up a visit. Tell us about your yard and the water feature you picture.

    Visit

    Let's bring your water to life.

    Tell us about your yard or your pond and the water you picture. We read every message and reply with clear next steps and a time for your visit.

    • Your property: where it is, the space you have and the water feature you picture or the one you own
    • Your city, the job you have in mind, and any result you saved from a tool on this site
    • A visit where we walk the yard, listen and begin a plan around what you want
    Prefer to talk? Call or text800-224-9245

    Your estimate request

    Prefer to type? Text your request. We only use your details to respond to your request.